I have a double-din Chinese gps unit in my car. I've recently upgraded to IGO Primo 2.4. Everything works great, except I have no voice commands. I've tried several suggestions I've found online, but nothing works. Here's my sys.txt: skip_eula=1 experimental_features=1 [interface] show_exit=1 extra_settings=1 [other] demo_enabled=0 [route] hnr_ignored_missing_country_ids=* [vr] disabled=0 [general] DirContent= SDMMC Primo content DirSave= SDMMC Primo save ExeName=iGO.exe Sound=set.wav [mapchanger] swpoi=0 swbuilding=0 swhistspeed=0 swphoneme=0 [sound] csv_voice_enabled=1 offline Joined: Fri Mar 01, 2013 2:24 am Posts: 4 Location: Minnesota, USA Has thanked: 0 time Been thanked: 0 time. I never saw [general] in sys.txt. Suggest to remove all the line under [general] and put following instead: [folders] app=”/Storage card/Primo” content=”/Storage card/Primo/Content” has_secondary_root=0 This means that the all Primo files and maps are in map Primo on the SD-card.

If that is the case you can even leave out the entire [folders] references. Leaving them is also o.k. For sound I recommand: [sound] csv_voice_enabled=1 ding=0 sound_q_length=200 queue_length=200 mute_os_key=1 and for debug: [debug] skip_eula=1 screenshotsavecameraini=0 screenshotfilename=' captures screen_%02d.jpg' show_battery_percent=1 experimental_features=1 show_networkservices=0 offline Joined: Sat Mar 26, 2011 7:23 pm Posts: 48 Has thanked: 0 time Been thanked: time. JohannesJ wrote:I never saw [general] in sys.txt. Suggest to remove all the line under [general] and put following instead: [folders] app=”/Storage card/Primo” content=”/Storage card/Primo/Content” has_secondary_root=0 This means that the all Primo files and maps are in map Primo on the SD-card.

Aug 6, 2010 - PODRŽANE REZOLUCIJE 480x272 / 320x240 / 480x234 - ostale uz. Tutorial (Vodič) za iGO Primo (dodana podrska za 320x240. Mape na iGO-u. To vam je samo da spremite koordinatu na sliku pa da ju. Class='landscape' to class='rlandscape'. View selected POIs in Google Map, Google Earth.

Here are the Driver for the Creative Sound Blaster Audigy 4 upgraded to Windows 10, but my Sound Card is the Audigy 4 Pro.: But for the Creative Sound Blaster Audigy 4 Pro, yet they are with older versions of drivers for Windows 7 and Windows Vista: Try to install the drivers for the Creative Sound Blaster Audigy 4 ' SBA4_SII_PCDRV_L02_3_01_0044.exe' but throws an error message that prevents hardware installation. The Driver of the Creative Sound Blaster Audigy 4 Pro. Audigy supportpack 4 5 exercises. Hi, My I wanted to ask if there is Driver or something better and that works for the sound card Creative Sound Blaster Audigy 4 Pro.

If that is the case you can even leave out the entire [folders] references. Leaving them is also o.k. For sound I recommand: [sound] csv_voice_enabled=1 ding=0 sound_q_length=200 queue_length=200 mute_os_key=1 and for debug: [debug] skip_eula=1 screenshotsavecameraini=0 screenshotfilename=' captures screen_%02d.jpg' show_battery_percent=1 experimental_features=1 show_networkservices=0 Tried using the sys.txt you recommended.

Unit would begin start-up procedure, then permanently stall. Reverted to my sys.txt file so that at least the unit with start and run without sound.

Offline Joined: Fri Mar 01, 2013 2:24 am Posts: 4 Location: Minnesota, USA Has thanked: 0 time Been thanked: 0 time. 1.You wrote: I upgraded to IGO Primo 2.4. Question: Upgraded from?? To Primo 2.4 With??

In use, was the voice command working correctly? 2.I suggested for [folders]: [folders] app=”/Storage card/Primo” content=”/Storage card/Primo/Content” has_secondary_root=0 assuming that Primo.exe (or what the name may be) was installed on the SD-card. Apparantly this is not the case.

Question: Where is sys.txt located? Paint tool sai full version tumblr png collage free. Give full path (e.g. My Flash disk/Primo). Is the used voice file a so called natural voice (so no TTS) file?

Did you try more than one voice file? If you change or add files, delete or rename the map save. If you change or add files on the SD-card, soft reset the system.

Offline Joined: Sat Mar 26, 2011 7:23 pm Posts: 48 Has thanked: 0 time Been thanked: time. I dowloaded and tried several different versions of Primo 2.4, copied over the maps, poi, user profile, etc. From my existing system, and found one where the sound/voices work. However, now I get the warning 'Application failed to start last time' warning each time I activate the gps. It asks if I want to start with a reset - it doesn't matter if I respond yes or no, it starts and remembers my setting. I've done an internet search for a solution to the problem, found several suggestions, (change scripting in sys.text, eliminate the Save folder, shut down the unit before turning off the car) but none has resolved the problem. It's an annoyance, but I'll live with it rather than having no sound.

Offline Joined: Fri Mar 01, 2013 2:24 am Posts: 4 Location: Minnesota, USA Has thanked: 0 time Been thanked: 0 time. G_e_l wrote:I dowloaded and tried several different versions of Primo 2.4, copied over the maps, poi, user profile, etc. From my existing system, and found one where the sound/voices work. However, now I get the warning 'Application failed to start last time' warning each time I activate the gps. It asks if I want to start with a reset - it doesn't matter if I respond yes or no, it starts and remembers my setting.

I've done an internet search for a solution to the problem, found several suggestions, (change scripting in sys.text, eliminate the Save folder, shut down the unit before turning off the car) but none has resolved the problem. It's an annoyance, but I'll live with it rather than having no sound. We had a somewhat similar problem that was finally fixed. If you look around post 153, you might find an answer that will give you some idea of how to proceed. You wrote: I dowloaded and tried several different versions of Primo 2.4, copied over the maps, poi, user profile, etc. From my existing system, and found one where the sound/voices work.