Programming Software (Default Password = AC5678) **For units 2015 and earlier only.** Windows 8.1 & 10 USB Driver.

The TPL Systems Birdy WP Alphanumeric POCSAG Pager is ruggedly designed for dependable use in severe working conditions. The pager holds an IP67 rating from the International Electrotechnical Commission (IEC) who classifies and rates the degree of protection provided against dust and water intrusion. An IP67 rating means the Birdy WP Pager is completely dust tight and does not allow ingress of harmful quantities of water when tested for 30 minutes at a depth of 1 meter.

Included with each Birdy WP POCSAG Pager is a belt clip and lanyard. The pager is synthesized, is operational in VHF or UHF frequency bands and works in 12.5, 20, and 25 kHz channel bandwidth systems. It can be programmed for up to 128 capcodes. The Birdy WP features a 5-line, 20 characters per line LCD display with zoom and multi-colored backlight capabilities. The pager uses a standard 1.5 VDC “AA” alkaline battery for power. If a rechargeable battery is preferred, Birdy WP Battery Chargers and Battery Chargers with Antenna are available. Pager alerting can be set to Vibrate, Tone and Vibrate, Vibrate Then Tone, or Silent Mode. Fgtech v54 keygen idm.

21 Alert Melodies are available from the pager. A total of 20 messages can be stored in pager memory, each containing a maximum of 255 characters.

Messaging features of note include Unread Message Alert and Low Battery Warning. Software Encryption using Secure Paging Protocol 256 is an option if secure messaging is required. The Birdy WP POCSAG Pager is configured through PC programming software and a USB connected programming fixture. The physical size of the pager is 3.3 x 2.5 x 0.9 inches. The pager is synthesized, is operational in VHF or UHF frequency bands and works in 12.5, 20, and 25 kHz channel bandwidth systems. It can be programmed for up to 128 capcodes.

The Birdy WP features a 5-line, 20 characters per line LCD display with zoom and multi-colored backlight capabilities. The pager uses a standard 1.5 VDC “AA” alkaline battery for power.

If a rechargeable battery is preferred, Birdy WP Battery Chargers and Battery Chargers with Antenna are available. Hp install a fatal error occurred preventing product user guide. Pager alerting can be set to Vibrate, Tone and Vibrate, Vibrate Then Tone, or Silent Mode. 21 Alert Melodies are available from the pager.

A total of 20 messages can be stored in pager memory, each containing a maximum of 255 characters. Messaging features of note include Unread Message Alert and Low Battery Warning. Software Encryption using Secure Paging Protocol 256 is an option if secure messaging is required. The Birdy WP POCSAG Pager is configured through PC programming software and a USB connected programming fixture.

The physical size of the pager is 3.3 x 2.5 x 0.9 inches. Products specifications Pager Type Alphanumeric Code Format POCSAG Freq. Band (VHF) 135 - 175 MHz Freq. Products specifications Pager Type Alphanumeric Code Format POCSAG Freq. Band (VHF) 135 - 175 MHz Freq.

The TX125EN is the most powerful and flexible Apollo transmitter, providing advanced in-house paging for users that require sending and managing pages from a PC or other system. All paging and control is done via the onboard RS-232 serial port. Primary features of the TX125EN include: • Calling of up to 999 pagers; • Full alphanumeric, numeric, and “alert-only” paging (aka “call-only” or “tone-only” paging with no written message); • Powerful 1 and 5 watt output modes, roughly equivalent to coverage of between 1/2 and 2-1/2 miles in unobstructed open space; • Programmable narrow band or wide band operation; • A rugged, ultra-compact, machined aluminum housing — about the size of two decks of cards. For basic “page from PC” applications, a TX125EN requires nothing more than a PC with a serial port running the included Apollo GACOMP2 paging software.

GACOMP2 enables users to initiate, track, and manage all pages from a simple and straightforward software interface. Because it adheres to standard paging protocols, the TX125EN is compatible with virtually any POCSAG pager, including all Apollo alphanumerics, numerics, LED signs, desktop pagers, and simplified staff and guest call pagers, from traditional clip on pagers to coasters, disks, and paddles. This makes the TX125EN suitable for any new in-house paging system, or for an existing fleet of pagers, regardless of type. For advanced applications, the TX125EN supports a wide variety of industry-standard control protocols, including TAP, COMP1, COMP2, and SCOPE. This enables the TX125EN to be controlled from third-party paging software or hardware systems, making it an ideal choice for system integrators. The TX125EN can be connected to a dedicated workstation, or to a “paging server” for initiating pages from multiple client workstations. A built-in receiver means the TX125EN can even serve as a management hub for systems using remote transmitters to acknowledge pages or provide other feedback, including nurse call systems.